Staying Ahead

We apply theoretical research outcomes for additive manufacturing through our partnership with the University of Windsor into our software.

Featured Research Projects Publications

Publications


Links to published literature from members of our team

Experimental Analysis of Single Layer Multi-track Deposition of Clad Beads with Variable Overlap Percentages

2020

Zareh, P., Urbanic, R.J. Experimental analysis of single layer multi-track deposition of clad beads with variable overlap percentages. Int J Adv Manuf Technol 109, 1511–1525 (2020). https://doi.org/10.1007/s00170-020-05672-5

Numerical Simulations for Laser Clad Beads with a Variable Side-to-side Overlap Condition

2020

Zareh, P., Urbanic, R.J. Numerical simulations for laser clad beads with a variable side-to-side overlap condition. Int J Adv Manuf Technol 109, 1027–1058 (2020). https://doi.org/10.1007/s00170-020-05565-7

Electron Backscatter Diffraction (EBSD) Analysis of Laser-cladded AISI 420 Martensitic Stainless Steel

2020

MK Alam, M Mehdi, RJ Urbanic, A Edrisy
Materials Characterization 161, 110138

Mechanical Behavior of additive manufactured AISI 420 martensitic stainless steel

2020

MK Alam, M Mehdi, RJ Urbanic, A Edrisy
Materials Science and Engineering: A 773, 138815

Real-Time Visualization Of Bead Based Additive Manufacturing Toolpaths using Implicit Boundary Representations

2019

S Peelar, RJ Urbanic, RW Hedrick, L Rueda

A Manufacturing Cost Analysis Framework to Evaluate Machining and Fused Filament Fabrication Additive Manufacturing Approaches

2019

Urbanic, R.J., Saqib, S.M. A manufacturing cost analysis framework to evaluate machining and fused filament fabrication additive manufacturing approaches. Int J Adv Manuf Technol 102, 3091–3108 (2019). https://doi.org/10.1007/s00170-019-03394-x

Virtual Bead Representation and Surface Roughness Evaluation Challenges for Additive Manufacturing Material Extrusion Processes

2019

Urbanic, R.J., DiCecco, L. Virtual bead representation and surface roughness evaluation challenges for additive manufacturing material extrusion processes. Int J Adv Manuf Technol 102, 2993–3009 (2019). https://doi.org/10.1007/s00170-019-03312-1

Microstructural Analysis of the Laser-Cladded AISI 420 Martensitic Stainless Steel

2019

Alam, M.K., Edrisy, A. & Urbanic, J. Microstructural Analysis of the Laser-Cladded AISI 420 Martensitic Stainless Steel. Metall and Mat Trans A 50, 2495–2506 (2019). https://doi.org/10.1007/s11661-019-05156-6

Determining the Relationships Between the Build Orientation, Process Parameters and Voids in Additive Manufacturing Material Extrusion Processes

2019

Eiliat, H., Urbanic, J. Determining the relationships between the build orientation, process parameters and voids in additive manufacturing material extrusion processes. Int J Adv Manuf Technol 100, 683–705 (2019). https://doi.org/10.1007/s00170-018-2540-6

A Mesh Generation Methodology for Laser Cladding Models with Variable Overlapping Beads

2019

P Zareh, RJ Urbanic

Predictive Modelling of Residual Stresses for Single Bead P420 Laser Cladding onto an AISI 1018 Substrate

2019

B Mohajernia, RJ Urbanic, N Nazemi
IFAC-PapersOnLine 52 (10), 236-241

Process Planning of Creating a Surface Dome with Bead Deposition Additive Manufacturing

2019

H Kalami, J Urbanic
IFAC-PapersOnLine 52 (10), 230-235

Developing Geometric Analysis Tools to Compare Heat Map Results for Metal Additive Manufactured Components

2019

RJ Urbanic, B Mohajernia, N Nazemi

Additive Manufacturing Bead Deposition Based Rotary Tool Path Applications

2018

Urbanic, Ruth Jill, and Hedrick, Bob. "Additive Manufacturing Bead Deposition Based Rotary Tool Path Applications." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition. Volume 2: Advanced Manufacturing. Pittsburgh, Pennsylvania, USA. November 9–15, 2018. V002T02A053. ASME. https://doi.org/10.1115/IMECE2018-86461

Virtual Quality Assessment Tools for Material Extrusion Processes

2018

RJ Urbanic, CG Burford, RW Hedrick
Computer-Aided Design and Applications 15 (4), 520-531

Material Bead Deposition with 2 + 2 ½ Multi-axis Machining Process Planning Strategies with Virtual Verification for Extruded Geometry

2018

Urbanic, R.J., Hedrick, R.W., Saquib, S. et al. Material bead deposition with 2 + 2 ½ multi-axis machining process planning strategies with virtual verification for extruded geometry. Int J Adv Manuf Technol 95, 3167–3184 (2018). https://doi.org/10.1007/s00170-017-1376-9

Using Collaborative Robots to Assist with Travel Path Development for Material Deposition Based Additive Manufacturing Processes

2018

Ana Djuric & R. Jill Urbanic (2018) Using collaborative robots to assist with travel path development for material deposition based additive manufacturing processes, Computer-Aided Design and Applications, 15:4, 542-555, DOI: 10.1080/16864360.2017.1419642

Visualizing, Analyzing, and Managing Voids In the Material Extrusion Process

2018

Eiliat, H., Urbanic, J. Visualizing, analyzing, and managing voids in the material extrusion process. Int J Adv Manuf Technol 96, 4095–4109 (2018). https://doi.org/10.1007/s00170-018-1820-5

A Numerical Investigation for Alternative Toolpath Deposition Solutions for Surface Cladding of Stainless Steel P420 Powder on AISI 1018 Steel Substrate

2018

Nazemi, N., Urbanic, R.J. A numerical investigation for alternative toolpath deposition solutions for surface cladding of stainless steel P420 powder on AISI 1018 steel substrate. Int J Adv Manuf Technol 96, 4123–4143 (2018). https://doi.org/10.1007/s00170-018-1840-1

Minimizing Voids for a Material Extrusion-based Process

2018

Eiliat, H. and Urbanic, R.J. (2018), "Minimizing voids for a material extrusion-based process", Rapid Prototyping Journal, Vol. 24 No. 2, pp. 485-500. https://doi.org/10.1108/RPJ-05-2017-0092

Development of Predictive Models for Effective Process Parameter Selection for Single and Overlapping Laser Clad Bead Geometry

2018

Aggarwal, K., Urbanic, R.J. and Saqib, S.M. (2018), "Development of predictive models for effective process parameter selection for single and overlapping laser clad bead geometry", Rapid Prototyping Journal, Vol. 24 No. 1, pp. 214-228. https://doi.org/10.1108/RPJ-04-2016-0059

An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties

2018

Nazemi, N., and Urbanic, J. (November 16, 2017). "An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties." ASME. J. Manuf. Sci. Eng. January 2018; 140(1): 011009. https://doi.org/10.1115/1.4037604

Predictive Modeling and the Effect of Process Parameters on the Hardness and Bead Characteristics for Laser-Cladded Stainless Steel

2018

Alam, M.K., Urbanic, R.J., Nazemi, N. et al. Predictive modeling and the effect of process parameters on the hardness and bead characteristics for laser-cladded stainless steel. Int J Adv Manuf Technol 94, 397–413 (2018). https://doi.org/10.1007/s00170-017-0898-5

Hardness and Residual Stress Modeling of Powder Injection Laser Cladding of P420 Coating on AISI 1018 Substrate

2017

Nazemi, N., Urbanic, J. & Alam, M. Hardness and residual stress modeling of powder injection laser cladding of P420 coating on AISI 1018 substrate. Int J Adv Manuf Technol 93, 3485–3503 (2017). https://doi.org/10.1007/s00170-017-0760-9

A Numerical Analysis Approach to Evaluate Hardness and Distortion for Selected Multi-Track Laser Cladding Configurations: P420 Steel Bead Deposition on Mild Steel

2017

Nazemi, Navid, and Urbanic, Ruth Jill. "A Numerical Analysis Approach to Evaluate Hardness and Distortion for Selected Multi-Track Laser Cladding Configurations: P420 Steel Bead Deposition on Mild Steel." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition. Volume 2: Advanced Manufacturing. Tampa, Florida, USA. November 3–9, 2017. V002T02A023. ASME. https://doi.org/10.1115/IMECE2017-70618

Utilizing a Numerical Simulation to Model a Step Function Response for 420 Stainless Steel Powder Laser Cladding

2017

Nazemi, Navid, Urbanic, Ruth Jill, and Saqib, Syed. "Utilizing a Numerical Simulation to Model a Step Function Response for 420 Stainless Steel Powder Laser Cladding." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition. Volume 2: Advanced Manufacturing. Tampa, Florida, USA. November 3–9, 2017. V002T02A027. ASME. https://doi.org/10.1115/IMECE2017-71687

Investigation of the Transient Characteristics for Laser Cladding Beads Using 420 Stainless Steel Powder

2017

Saqib, S. M., and Urbanic, R. J. (May 10, 2017). "Investigation of the Transient Characteristics for Laser Cladding Beads Using 420 Stainless Steel Powder." ASME. J. Manuf. Sci. Eng. August 2017; 139(8): 081009. https://doi.org/10.1115/1.4036488

A Process Planning Framework and Virtual Representation for Bead-based Additive Manufacturing Processes

2017

Urbanic, R.J., Hedrick, R.W. & Burford, C.G. A process planning framework and virtual representation for bead-based additive manufacturing processes. Int J Adv Manuf Technol 90, 361–376 (2017). https://doi.org/10.1007/s00170-016-9392-8

A Hardness Study on Laser Cladded Surfaces for a Selected Bead Overlap Conditions

2017

Nazemi, N., Alam, M., Urbanic, R., Saqib, S. et al., "A Hardness Study on Laser Cladded Surfaces for a Selected Bead Overlap Conditions," SAE Technical Paper 2017-01-0285, 2017, https://doi.org/10.4271/2017-01-0285.

Investigating Process Parameters and Microhardness Predictive Modeling Approaches for Single Bead 420 Stainless Steel Laser Cladding

2017

Alam, M., Nazemi, N., Urbanic, R., Saqib, S. et al., "Investigating Process Parameters and Microhardness Predictive Modeling Approaches for Single Bead 420 Stainless Steel Laser Cladding," SAE Technical Paper 2017-01-0283, 2017, https://doi.org/10.4271/2017-01-0283.

Microhardness and Stress Analysis of Laser-Cladded AISI 420 Martensitic Stainless Steel

2017

Alam, M.K., Edrisy, A., Urbanic, J. et al. Microhardness and Stress Analysis of Laser-Cladded AISI 420 Martensitic Stainless Steel. J. of Materi Eng and Perform 26, 1076–1084 (2017). https://doi.org/10.1007/s11665-017-2541-x

Minimizing Voids With Using an Optimal Raster Orientation and Bead Width for a Material Extrusion Based Process

2016

Eiliat, Hasti, and Urbanic, Jill. "Minimizing Voids With Using an Optimal Raster Orientation and Bead Width for a Material Extrusion Based Process." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition. Volume 2: Advanced Manufacturing. Phoenix, Arizona, USA. November 11–17, 2016. V002T02A070. ASME. https://doi.org/10.1115/IMECE2016-67708

A Finite Element Analysis for Thermal Analysis of Laser Cladding of Mild Steel With P420 Steel Powder

2016

Nazemi, Navid, and Urbanic, Jill. "A Finite Element Analysis for Thermal Analysis of Laser Cladding of Mild Steel With P420 Steel Powder." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition. Volume 2: Advanced Manufacturing. Phoenix, Arizona, USA. November 11–17, 2016. V002T02A073. ASME. https://doi.org/10.1115/IMECE2016-65654

A System Design for Computer-Aided Manufacturing Shared, Interactive Process Setup Sheets

2016

Hedrick, R., Urbanic, R. J., and Novak, Ashley. "A System Design for Computer-Aided Manufacturing Shared, Interactive Process Setup Sheets." Proceedings of the ASME 2016 11th International Manufacturing Science and Engineering Conference. Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. Blacksburg, Virginia, USA. June 27–July 1, 2016. V002T04A015. ASME. https://doi.org/10.1115/MSEC2016-8723

Fused Deposition Modeling Design Rules for Building Large, Complex Components

2016

R. J. Urbanic & R. Hedrick (2016) Fused Deposition Modeling Design Rules for Building Large, Complex Components, Computer-Aided Design and Applications, 13:3, 348-368, DOI: 10.1080/16864360.2015.1114393

Methods for Evaluating the Functional Work Space for Machine Tools and 6 Axis Serial Robots

2016

R.J. Urbanic and Ana M. Djuric
SAE International Journal of Materials and Manufacturing
Vol. 9, No. 2 (May 2016), pp. 465-473

A Linkage Based Solution Approach for Determining 6 Axis Serial Robotic Travel Path Feasibility

2016

RJ Urbanic, R Hedrick, AM Djuric
SAE International Journal of Materials and Manufacturing 9 (2), 444-456

Using Predictive Modeling and Classification Methods for Single and Overlapping Bead Laser Cladding to Understand Bead Geometry to Process Parameter Relationships

2016

Urbanic, R. J., Saqib, S. M., and Aggarwal, K. (January 4, 2016). "Using Predictive Modeling and Classification Methods for Single and Overlapping Bead Laser Cladding to Understand Bead Geometry to Process Parameter Relationships." ASME. J. Manuf. Sci. Eng. May 2016; 138(5): 051012. https://doi.org/10.1115/1.4032117

A Comprehensive Assessment on the Impact of Post-processing Variables on Tensile, Compressive and Bending Characteristics for 3D Printed Components

2016

Impens, D. and Urbanic, R.J. (2016), "A comprehensive assessment on the impact of post-processing variables on tensile, compressive and bending characteristics for 3D printed components", Rapid Prototyping Journal, Vol. 22 No. 3, pp. 591-608. https://doi.org/10.1108/RPJ-02-2015-0018

Investigating Surface Finish for Material Extrusion Process using Graphical Programming Tools

2016

RJ Urbanic, L DiCecco
IFAC-PapersOnLine 49 (31), 36-41

A Matrix-based Framework for Assessing Machine Tool Reconfiguration Alternatives

2015

Urbanic, R.J., Hedrick, R.W. A matrix-based framework for assessing machine tool reconfiguration alternatives. Int J Adv Manuf Technol 81, 1893–1919 (2015). https://doi.org/10.1007/s00170-015-7287-8

An Analysis of Variation Correlating Post Processing Infiltrate Types, Build Parameters and Mechanical Characteristics for Binder Jet Built Parts

2015

Impens, David, and Urbanic, Ruth Jill. "An Analysis of Variation Correlating Post Processing Infiltrate Types, Build Parameters and Mechanical Characteristics for Binder Jet Built Parts." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Houston, Texas, USA. November 13–19, 2015. V02AT02A017. ASME. https://doi.org/10.1115/IMECE2015-52615

Development of Adaptable Light Weighting Methods for Material Extrusion Processes

2015

Urbanic, Ruth Jill, and DiCecco, Liza. "Development of Adaptable Light Weighting Methods for Material Extrusion Processes." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Houston, Texas, USA. November 13–19, 2015. V02AT02A003. ASME. https://doi.org/10.1115/IMECE2015-51174

Effect of Process Parameters on the Microstructural Evolutions of Laser Cladded 420 Martensitic Stainless Steel

2015

MK Alam, J Urbanic, SM Saqib, A Edrisy
Materials science and technology conference proceedings (MS&T15), October, 4-8

Development Considerations for an Additive Manufacturing CAM System

2015

RW Hedrick, RJ Urbanic, CG Burford
IFAC-PapersOnLine 48 (3), 2327-2332

Identifying Relative Importance of Input Parameter(s) for Developing Predictive Model for Laser Cladding Process

2015

Aggarwal, Kush, Urbanic, Ruth Jill, Aggarwal, Luv, and Saqib, Syed. "Identifying Relative Importance of Input Parameter(s) for Developing Predictive Model for Laser Cladding Process." Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Montreal, Quebec, Canada. November 14–20, 2014. V02AT02A009. ASME. https://doi.org/10.1115/IMECE2014-37719

Identifying Relative Importance of Input Parameter(s) for Developing Predictive Model for Laser Cladding Process

2014

Aggarwal, Kush, Urbanic, Ruth Jill, Aggarwal, Luv, and Saqib, Syed. "Identifying Relative Importance of Input Parameter(s) for Developing Predictive Model for Laser Cladding Process." Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Montreal, Quebec, Canada. November 14–20, 2014. V02AT02A009. ASME. https://doi.org/10.1115/IMECE2014-37719

Using Genetic Algorithms to Optimize the Build Orientation for Fused Deposition Modeled Components Containing Internal Reinforcement Structures

2014

Eiliat, Hasti, and Urbanic, Ruth Jill. "Using Genetic Algorithms to Optimize the Build Orientation for Fused Deposition Modeled Components Containing Internal Reinforcement Structures." Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition. Volume 2B: Advanced Manufacturing. Montreal, Quebec, Canada. November 14–20, 2014. V02BT02A027. ASME. https://doi.org/10.1115/IMECE2014-37683

A Methodology for Investigating and Modelling Laser Clad Bead Geometry and Process Parameter Relationships

2014

Kush Aggarwal, Ruth Urbanic and Luv Aggarwal
SAE International Journal of Materials and Manufacturing
Vol. 7, No. 2 (April 2014), pp. 269-279

An Optimization Approach for Components Built by Fused Deposition Modeling with Parametric Internal Structures

2014

L Villalpando, H Eiliat, RJ Urbanic
Procedia Cirp 17, 800-805

Analysis of Laser Cladding Bead Morphology for Developing Additive Manufacturing Travel Paths

2014

S Saqib, RJ Urbanic, K Aggarwal
Procedia Cirp 17 (0), 824-829

Targeted Reverse Engineering Techniques for Generating Architectural Solid Models for Additive Manufacturing Fabrication

2013

R. J. Urbanic, M. Kilani & A. Hassoun (2013) Targeted Reverse Engineering Techniques for Generating Architectural Solid Models for Additive Manufacturing Fabrication, Computer-Aided Design and Applications, 10:4, 585-602, DOI: 10.3722/cadaps.2013.585-602

Integration of Additive Manufacturing and Virtual Verification Strategies within a Commercial CAM System

2013

R. W. Hedrick & R. J. Urbanic (2013) Integration of Additive Manufacturing and Virtual Verification Strategies within a Commercial CAM System, Computer-Aided Design and Applications, 10:4, 567-583, DOI: 10.3722/cadaps.2013.567-583

A Foundation for Integrating Hand Held Mobile Devices in a Computer Aided Manufacturing Environment

2012

R Hedrick, J Urbanic
Enabling Manufacturing Competitiveness and Economic Sustainability, 281-286

© Copyright 2020 CAMufacturing Solutions, Inc. - All Rights Reserved

Website was created with Mobirise